| Open & Closed Type Hi-Tech Shelving |
Starter units include:
Two beaded front posts
Two angle back posts
One pair back sway braces
Two pair side sway braces
5-8 shelves
Adder units include:
One beaded front post
Two angle back posts
One pair back sway braces
One pair side sway braces
5-8 shelves
Units come in three varying sizes:
36" wide x 87" high
42" wide x 87" high
48" wide x 87" high
Two beaded front posts
Two angle back posts
One pair back sway braces
Two pair side sway braces
5-8 shelves
Adder units include:
One beaded front post
Two angle back posts
One pair back sway braces
One pair side sway braces
5-8 shelves
Units come in three varying sizes:
36" wide x 87" high
42" wide x 87" high
48" wide x 87" high
| Capacities range from 400 - 1250 lb Shelf Capacity depending on class & shelf size. |
| Rivetwell Shelving |
Boltless Shelving is designed to maximize storage space and minimize installation/set-up
time. All components are engineered to attach snugly to one another without the use of
loose fasteners. This unique design has rivets which are factory attached to all left-to-
right and front-to-back beams. The rivets align with keyhole slots in the vertical posts.
Once tapped into place using a standard rubber mallet, the units are tightly assembled
providing maximum strength.
Standard units consist of vertical angle posts at the corners, double rivet angle beams at
the top and bottom perimeter and single rivet angle beams running left-to-right only at the
intermediate levels. Shelves are of standard 5/8” particle board, EZ-Deck steel or wire
decking and simply drop into place. Shelf strength can be increased by upgrading to
heavy duty beams, adding single rivet beams running front-to-back at the intermediate
levels, upgrading to double rivet beams at the full perimeter of the intermediate levels or
upgrading all levels to our strongest double rivet channel beams. Center supports can be
added to increase decking capacity.
The versatility of our Rivetwell Boltless Shelving system allows you to mix and match
components to meet your unique application. From standard storage applications to
record storage to automotive tire racks, Rivetwell Boltless Shelving is your storage
solution.
time. All components are engineered to attach snugly to one another without the use of
loose fasteners. This unique design has rivets which are factory attached to all left-to-
right and front-to-back beams. The rivets align with keyhole slots in the vertical posts.
Once tapped into place using a standard rubber mallet, the units are tightly assembled
providing maximum strength.
Standard units consist of vertical angle posts at the corners, double rivet angle beams at
the top and bottom perimeter and single rivet angle beams running left-to-right only at the
intermediate levels. Shelves are of standard 5/8” particle board, EZ-Deck steel or wire
decking and simply drop into place. Shelf strength can be increased by upgrading to
heavy duty beams, adding single rivet beams running front-to-back at the intermediate
levels, upgrading to double rivet beams at the full perimeter of the intermediate levels or
upgrading all levels to our strongest double rivet channel beams. Center supports can be
added to increase decking capacity.
The versatility of our Rivetwell Boltless Shelving system allows you to mix and match
components to meet your unique application. From standard storage applications to
record storage to automotive tire racks, Rivetwell Boltless Shelving is your storage
solution.
| Bulk Storage Lockers |
For more secure, attractive and economical storage areas Art Metal Products all steel Bulk Storage Lockers
have been designed to provide maximum security, durability and attractiveness as well as economy in both unit
cost and installation. The use of manufactured lockers lends itself to a neat appearing installation which, when
properly promoted can be a tremendous asset to the building.
Attractive
Durable
Dependable security
Fire resistant construction
Quick, economical installation
Single & double tier models
Stock Sizes:
Widths: 36" 48"
Depths: 36" 48" 60"
Height: 90"
Front Extension Panels are available in 6" wide increments from 6" wide to 48" wide to create oversized width
units.
Options
Tops are recommended for situations where the ceiling height is 8'-6" or more when using standard 7'-6" high
component modules.
Shelves are used as dividers between top and bottom openings of double tier lockers. May also be used in single
tier lockers for additional floor space and may be shorter than depth of locker to provide space for long items.
Backs are required for back-to-back installations or where a single row is set away from a wall.
Bottoms are recommended for use on all single or double tier lockers if dampness prevails.
For more secure, attractive and economical storage areas Art Metal Products all steel bulk storage lockers have
been designed to provide maximum security, durability and attractiveness as well as economy in both unit cost
and installation. The use of manufactured lockers lends itself to a neat appearing installation which, when
properly promoted can be a tremendous asset to the building.
Attractive
Durable
Dependable security
Fire resistant construction
Quick, economical installation
Single & double tier models
Stock Sizes:
Widths: 36" 48"
Depths: 36" 48" 60"
Height: 90"
Front Extension Panels are available in 6" wide increments from 6" wide to 48" wide to create oversized width
units.
Options
Tops are recommended for situations where the ceiling height is 8'-6" or more when using standard 7'-6" high
component modules.
Shelves are used as dividers between top and bottom openings of double tier lockers. May also be used in single
tier lockers for additional floor space and may be shorter than depth of locker to provide space for long items.
Backs are required for back-to-back installations or where a single row is set away from a wall.
Bottoms are recommended for use on all single or double tier lockers if dampness prevails.
have been designed to provide maximum security, durability and attractiveness as well as economy in both unit
cost and installation. The use of manufactured lockers lends itself to a neat appearing installation which, when
properly promoted can be a tremendous asset to the building.
Attractive
Durable
Dependable security
Fire resistant construction
Quick, economical installation
Single & double tier models
Stock Sizes:
Widths: 36" 48"
Depths: 36" 48" 60"
Height: 90"
Front Extension Panels are available in 6" wide increments from 6" wide to 48" wide to create oversized width
units.
Options
Tops are recommended for situations where the ceiling height is 8'-6" or more when using standard 7'-6" high
component modules.
Shelves are used as dividers between top and bottom openings of double tier lockers. May also be used in single
tier lockers for additional floor space and may be shorter than depth of locker to provide space for long items.
Backs are required for back-to-back installations or where a single row is set away from a wall.
Bottoms are recommended for use on all single or double tier lockers if dampness prevails.
For more secure, attractive and economical storage areas Art Metal Products all steel bulk storage lockers have
been designed to provide maximum security, durability and attractiveness as well as economy in both unit cost
and installation. The use of manufactured lockers lends itself to a neat appearing installation which, when
properly promoted can be a tremendous asset to the building.
Attractive
Durable
Dependable security
Fire resistant construction
Quick, economical installation
Single & double tier models
Stock Sizes:
Widths: 36" 48"
Depths: 36" 48" 60"
Height: 90"
Front Extension Panels are available in 6" wide increments from 6" wide to 48" wide to create oversized width
units.
Options
Tops are recommended for situations where the ceiling height is 8'-6" or more when using standard 7'-6" high
component modules.
Shelves are used as dividers between top and bottom openings of double tier lockers. May also be used in single
tier lockers for additional floor space and may be shorter than depth of locker to provide space for long items.
Backs are required for back-to-back installations or where a single row is set away from a wall.
Bottoms are recommended for use on all single or double tier lockers if dampness prevails.
| Bulk Storage Cabinets |
Functional, durable and adaptable
Gives maximum protection to tools, dies, delicate instruments, supplies, and personal
belongings
Neat and attractive in appearance
Designed for government requirements
Cabinet is fabricated from heavy gauge steel for appearance and durability
All metal parts are precision engineered. No bolt heads show in front or on side panels
Positive three-point locking (top, center and bottom) and theft resistant hinges for security
Shelf support strips are integral part of cabinet
Chrome-plated locking handle has built-in groove cylinder lock
Shelves easily adjust up or down in 2" increments. Triple flanged front for added strength
(300 lb. capacity)
Doors swing out quietly a full 180° and are hat section reinforced
All welded door frame assembly assures even closure all the way around
Doors are factory assembled in frame to insure accurate fit
Corner Foot Gussets
Model Deep Description
815-S-18 18 Double door storage cabinet with four shelves adjustable on 2" centers. 24"
deep model holds more than 36 cubic feet of material. 36" wide x 78" high
815-S-24 24
835-W-18 18 Wardrobe cabinet. Double door - holds 12 to 16 heavy coats or jackets. Full
width hat shelf, coat rod and two coat hooks. 36" wide x 78" high
835-W-24 24
855-C-18 18 Double door combination cabinet. Stores supplies as well as wardrobe. Full
width hat shelf, three half width shelves adjustable on 2" centers, coat rod and two coat
hooks. 36" wide x 78" high
855-C-24 24
Gives maximum protection to tools, dies, delicate instruments, supplies, and personal
belongings
Neat and attractive in appearance
Designed for government requirements
Cabinet is fabricated from heavy gauge steel for appearance and durability
All metal parts are precision engineered. No bolt heads show in front or on side panels
Positive three-point locking (top, center and bottom) and theft resistant hinges for security
Shelf support strips are integral part of cabinet
Chrome-plated locking handle has built-in groove cylinder lock
Shelves easily adjust up or down in 2" increments. Triple flanged front for added strength
(300 lb. capacity)
Doors swing out quietly a full 180° and are hat section reinforced
All welded door frame assembly assures even closure all the way around
Doors are factory assembled in frame to insure accurate fit
Corner Foot Gussets
Model Deep Description
815-S-18 18 Double door storage cabinet with four shelves adjustable on 2" centers. 24"
deep model holds more than 36 cubic feet of material. 36" wide x 78" high
815-S-24 24
835-W-18 18 Wardrobe cabinet. Double door - holds 12 to 16 heavy coats or jackets. Full
width hat shelf, coat rod and two coat hooks. 36" wide x 78" high
835-W-24 24
855-C-18 18 Double door combination cabinet. Stores supplies as well as wardrobe. Full
width hat shelf, three half width shelves adjustable on 2" centers, coat rod and two coat
hooks. 36" wide x 78" high
855-C-24 24
| For Detailed Information on any Product Contact: Richard Peterson - Destin, FL Office 850-837-5651 Allen Peterson - Pensacola, FL Office 850-433-9610 |
Shelving Systems
850-837-5651 Destin Office
850-433-9610 Pensacola Office
850-433-9610 Pensacola Office
Solutions Unlimited!
Display or Bulk Shelving System, Indoff has the solution for you!
Industrial-Office